The Eco
Systems is installed inline on
your vehicle's fuel line after the fuel pump/filter and before
the fuel injection system. When the fuel passes through the unit
it creates a catalytic reaction, breaking up the hydro carbon
chains in the fuel, causing the vapor pressure to increase. This
increase in vapor pressure causes the fuel to burn more completely
in the combustion chamber. The more complete burn means lower
emissions, increased power, less hesitation and less fuel consumed.
By the fuel burning more completely, you also have less carbon
buildup, cleaner injectors and less carbon going into your oil.
ECO-1
above is an example of an installation using the barbed
male ends. Fittings are an additional charge. Please see
your dealer for the correct fittings for your application.
ECO-1
Is for 1 to 4 Cylinder gasoline engines
motorcycles, jet skis, outbooard motors, etc.
ECO-2
Is for larger 4
cylinder, V-6 and V-8
gasoline engines less than
5.0 liter & small diesel cars.
ECO-2
above is an example of Quick Disconnect with fittings assembly.
Fittings are an additional charge. Please see your dealer
for the correct fittings for your application.
ECO-4
above is an example of an installation of the large fuel
line adapter fittings. Fittings are an additional charge.
Please see your dealer for the correct fittings for your
application.
ECO- 4
Is for 5.0 liter
gasoline and larger up to
heavy duty diesel engines
below 500 HP & Chevy
Duramax & Ford 6.4 Liter.
Chevy Duramax, Ford 6.4 Liter require ECO-4
due to fuel line size.
Not
Pictured are the ECO-5 and ECO-7 Units
ECO-5
Diesel Engines Over 500 hp.
ECO-7
Is a 2" Diameter Unit used
for Commercial Boilers in Building.